This Science News Wire page contains a press release issued by an organization and is provided to you "as is" with little or no review from Science X staff.

RUDN Mathematicians Model 5G Network for the Future Factories

August 21st, 2022
RUDN Mathematicians Model 5G Network for the Future Factories
Credit: RUDN University

RUDN mathematicians have created a model of future factory, equipped with a large number of devices that communicate with each other through 5G. Scientists were able to avoid drops and to provide the most reliable and fast connection. The results are published in IEEE Access.

5G or New Radio (NR) supports simultaneous support for two services— eMBB (enhanced Mobile BroadBand) and URLLC (Ultra-Reliable and Low-Latency Communication). The eMBB is the next step after the 4G stage in mobile data networks. URLLC is designed for remote control of mechanisms and robots—for example, unmanned vehicles. In real conditions, eMBB and URLLC traffic is mixed. It can reduce the speed and reliability of the connection. RUDN University mathematicians found the solution of this problem. The key step is to find the best strategy for prioritizing services within the network.

"Fifth-generation (5G) mobile systems have been developed for a wide range of applications. Therefore, NR base stations must support both eMBB and URLLC. Now research is aimed at mechanisms to support these services in isolation. However, joint support for these types of traffic is little studied. We investigated the possibility of simultaneous support of eMBB and URLLC in industrial 5G NR networks through prioritization," said Daria Ivanova, Postgraduate Student at Department of Applied Informatics and Probability Theory, RUDN University.

RUDN mathematicians considered the model of future factory. 5G-network is deployed at that factory, equipped with mobile robots and a variety of devices and sensors. They transfer data to the cloud service, where the control module makes decisions and translates new tasks. Sensors and detectors generate URLLC traffic while surveillance devices generate eMBB traffic. At the same time, everything moves interfering the signal. Having described this system mathematically, scientists have selected the optimal network strategy that provides better speed and reliability with a minimum number of base stations.

It turned out that it is possible to completely separate eMBB and URLLC traffics by prioritization. The D2D (device-to-device) strategy allows one to achieve the most reliable connection, namely, to ensure the probability of URLLC breaking out by only one thousandth of a percent. The secret of D2D is that the base station knowingly reserves part of the resources for the direct exchange of information between the devices themselves.

"Our numerical results show that prioritization allows you to effectively isolate traffic and does not require external control. A D2D-aware strategy, where the base station reserves some resources for direct communication, is significantly superior to those where explicit redundancy is not used, as well as a strategy in which all traffic passes through the base station. Our model can be used to calculate the required density of base stations for all the strategies considered," said Ekaterina Markova, Ph.D., Associate Professor at Department of Applied Informatics and Probability Theory, RUDN University.

More information:
Daria Ivanova et al, Performance of Priority-Based Traffic Coexistence Strategies in 5G mmWave Industrial Deployments, IEEE Access (2022). DOI: 10.1109/ACCESS.2022.3143583

Provided by RUDN University

Citation: RUDN Mathematicians Model 5G Network for the Future Factories (2022, August 21) retrieved 28 December 2024 from https://sciencex.com/wire-news/422510073/rudn-mathematicians-model-5g-network-for-the-future-factories.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.