This Science News Wire page contains a press release issued by an organization and is provided to you "as is" with little or no review from Science X staff.

The race to finer and better imaging with structured terahertz light

December 8th, 2022
Race to finer and better imaging with structured terahertz light
An artist depiction of nondiffractive Airy beam generation using flat silicon-based Airy lens. Colored structures illustrate intensity distributions of the Airy beam in transverse and in the longitudinal planes. Credit: Tielrooij, KJ., Principi, A., Reig, D.S.

Whereas sunlight is incoherent, laser sources produce coherent light (i.e., when light displays not only the same color, but also the same phase). For everyday uses, humans employ incoherent light illumination, but for scientific and industrial applications, light sources should be coherent.

The most common source of such coherent illumination is a laser. We encounter lasers when we say make a presentation and use a laser pointer to point at the particular place in the slide on the screen. In other words, we illuminate the point of interest with a bright green (or red) color laser.

The illumination of the laser pointer can be easily inspected by placing an obstacle (for instance, a piece of paper) in its way. The laser then produces a soft edge light spot on the paper. As we move the paper sheet away from the laser pointer, we might notice that the laser spot increases its dimensions. Scientists call this phenomenon "diffraction." The spot from the laser pointer would increase to few hundreds meters if the laser pointer would shine on the moon.

Not every configuration of the laser light coming from the source exhibits this behavior. If we create laser light with some structure, one can overcome the diffractive spreading of the laser light. Such structured illumination has its own name within electromagnetics—nondiffractive beams; laser-structured beams that are resistant to diffraction. They do not spread as they propagate and preserve their internal structure. This internal structure is known as the beam profile.

The most well-known example of non-diffracting beams is the Bessel beam, where its focus is extended and looks like a needle. If we look at it on the white paper sheet, we see a central bright spot surrounded by concentric rings. The second example of nondiffracting beam is the Airy beam, which is not only nondiffracting but also propagates not along a straight line. Actually, it can propagate along a variety of different curved paths—parabolic, hyperbolic, reciprocal, etc.

Laser illumination is usually generated and controlled using lenses. Nondiffracting beams are quite different when compared to the common laser light spots, so they require specific photonic elements for their creation and manipulation. Bessel beams are created using axicons also called conical prisms. Beams similar to the laser pointer are created, controlled, and managed using surfaces enclosed by concave parabolic shapes.

Airy beams usually do appear after glasses with cubic and other enclosing surfaces. Generally speaking, we require solid glasses with prescribed surface shapes that perform the required phase-forming function. This scientific approach might in some cases result in both bulky elements and complicated fabrication processes.

The solution to this problem is the introduction of Fresnel elements, where the part of the glass volume which does not contribute to the phase function is removed from the photonic element. A good example are Fresnel lenses seen in lighthouses around the world. In a similar fashion scientists create flat photonic elements, where subtle changes in the surface (or volume) structure realize the phase delay which is required to create specific laser structured light.

These advances do enable us to engineer custom focal spot structures also called caustics, which can be further employed for specific purposes. One of such specific purpose is the structured illumination in various imaging, object inspection or recognition tasks. Conventional imaging is performed using conventional lenses and shapes of light.

But what will happen if structured light illuminates objects in an imaging scenario? This is the question that scientists from the Center for Physical Sciences and Technology, FTMC (Vilnius, Lithuania) have asked themselves.

Race to finer and better imaging with structured terahertz light
An artist depiction of the Airy nondiffracting beam generated using flat optical element. In (a) the Airy beam self-heals after passing through an obstacle. In (b) the Airy beam illuminates a sample with different number of stacked graphene layers deposited on silicon substrate. Underneath the pictures of graphene layers recorded intensity distributions for each sample are depicted and orientation is denoted by letters x and y. Credit: Tielrooij, KJ., Principi, A., Reig, D.S.

In their latest effort, R. Ivaškevičiūtė-Poviliauskienė and co-workers has investigated the generation and performance of terahertz (THz) structured light created using flat photonic elements in the inspection of objects and 2D materials.

The THz range of electromagnetic waves, which frequencies are 1000 times higher than that of the operation of mobile phones, has numerous advantages over the visible range of frequencies and a growing number of applications. First of all, flat photonic elements can be easily created using a laser ablation with femtosecond high-power pulses.

A relatively large wavelength of the THz radiation makes inspection of photonic elements easy and enables for non-intrusive imaging of relatively large objects common in the everyday life. Much more importantly, photonic elements are cheap and easy to produce and due to the scaling of the wavelengths results are easily transferable to other wavelengths of electromagnetic radiation. Moreover, THz light displays attractive feature to propagate in dielectric substances, thus it can serve as convenient and non-destructive tool for security or medical aims.

One of the most important parameters in photonic imaging is the resolution and the contrast; first meaning the finesse of structures and objects we can recognize in the image and later being an indication how good the image can be resolved from the background signal. Surprisingly, the structured nonparaxial illumination consistently outperformed the conventional nonstructured illumination offering better contrast and resolution.

Conventional imaging can increase resolution by using bulkier high numerical aperture lenses. In this work, the authors have revealed how to increase those THz imaging characteristics without going to higher numerical apertures. Moreover, it was demonstrated that an illumination created using cubic phases might be superior to that one created with linear phase elements, though the differences are subtle and certainly require a second look.

Nondiffracting electromagnetic radiation is known for its ability to self-heal and reconstruct after being met with an obstacle. But what about illuminating objects behind an obstacle in imaging scenarios?

As Airy illumination has a self-accelerating bending propagation trajectory, it was expected to observe its ability to illuminate an object behind an obstacle, e. g. to see an object placed behind the corner. The team was surprised that another nondiffracting illumination could keep the pace in this competitiveness benchmark—the Bessel beam was also potent performer in this task. So both structured non-paraxial illuminations can indeed see around the corners!

Lastly, the team has showcased the ability of structured illumination to distinguish between the optical properties of semitransparent layers of nanomaterials placed on a silicon wafer. For this purpose, they used five different samples with different numbers of graphene layers. As this promising 2D material is deposited on Si substrate which is transparent to THz light and interacts with the wafer. This interaction leads to a variety of effects, like electron depletion, mechanical strains, etc.

All those things that happen to graphene influence its optical properties, which can be nicely resolved employing features of THz structured light. Simulations indicated further possible exploration tracts in applying such a THz light engineering approach in other imaging scenarios.

The study is published in the journal Light: Science & Applications.

More information:
Klaas-Jan Tielrooij et al, Milliwatt terahertz harmonic generation from topological insulator metamaterials, Light: Science & Applications (2022). DOI: 10.1038/s41377-022-01008-y

Provided by Chinese Academy of Sciences

Citation: The race to finer and better imaging with structured terahertz light (2022, December 8) retrieved 28 March 2024 from https://sciencex.com/wire-news/431940313/the-race-to-finer-and-better-imaging-with-structured-terahertz-l.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.